|
|
|
|
|
 |
Our ESD Workstation Mat keeps micro-circuitry components safe from the potentially damaging effects of static shocks. Our spongy, three-layer material should be used underneath computers, and on desks or table workstations where sensitive components are repaired or packaged. For maximum effectiveness use it with Ground Cord and Wrist Strap accessories shown below.
Specs
Uses: To control static on work tables and desks
Compound: 3-Layer Vinyl Surface
Resistivity: RTT - 5 x 107 to 8 x 108 ohm
RTG - 5 x 107 to 8 x 108 ohm
Flammability: “A” Rating per MVSS 302
Thickness: 1/8”
Warranty: 1 year, conditional
Color: Sky Blue(SB)
|
|
|
| Stock Sizes |
Price |
|
| 2' x 3' |
$36.00 |
| 2' x 4' |
$48.00 |
| Common Cord |
$11.50 |
| Wrist Strap |
$9.75 |
| Stock rolls ship freight. Shipping will not be calculated on orders over 150 lbs. Please proceed to process your order and we will contact you with the freight cost. |
| Custom Sizes |
$6.00/ sq. ft. |
|
Custom sizes are available in 2' and 3' widths up to 100' in length. Custom sizes are not returnable. Please click below to order a custom size ESD Workstation mats.
|
|
|
|
| Accessories |
|
| Use our 6’ Coil Cord and Wrist Strap to ground workers to their ESD tabletop mats. One inch wide comfort strap with copper sulfide fibers is attached to a 6’ Coil Cord with snap on one end and a banana jack on the other. Separate alligator clip. Has a one megaohm resistor. To complete the connection to a building ground, connect the coil cord to our 797.CPCord or simply clip to the grounding snap. Equipped with dual jacks, our Common Point Ground Cord allows two wrist straps to be grounded at the same point. The molded-in male fastener snaps to table-top mats while the solderless terminal at the end of the 15’ cord connects to a building ground. Conforms to 10mm snaps. |
 |
|
|