|
|
|
|
|
Basic installation of G-Floor© Roll-Out Flooring does not require adhesives of any kind. However, for special applications and professional installation, many of our customers and vendors have used various types of adhesives. The manufacturer BLT has tested and is now recommending the following adhesive products. Always read and follow label directions for best results.
|
|
|
BLT (G-Floor®) Adhesive is an easily applied, pressure-sensitive adhesive created for installation of BLT (G-Floor®) floor covering materials. This BLT adhesive has unlimited open time with unlimited tack and may be used over most structurally sound, moisture-free interior subfloors.
There is no need for adhesive tape when purchasing this BLT adhesive. Simply clear your garage floor and apply this high quality product on with a paint roller. Lay down your new BLT garage floor mat and watch solvent bonding do the trick in no time at all! (Adhesive is ready to apply to floor when it turns clear and tacky to the touch) Not only will you’re new BLT mat look great but you’ll never have to worry about it seperating from your garage floor. Available in a one gallon pail or four gallon bucket.
Pressure Sensitive Adhesive
Use to adhere G-Floor Garage Floor Mat to your garage floor.
One gallon pail - $46.00
Covers approx. 200 to 400 Sq. Ft.
Four gallon bucket - $145.00
Covers approx. 800 to 1600 Sq. Ft. |
|
|
|
BLT G-Floor Seaming Tape is an Acrylic Adhesive/Glass Cloth Tape. It's much easier to apply than the Bonding Strip and Solvent, with less mess!
FEATURES:
- Waterproof
- Withstands extreme temperatures
- Creates a Like-permanent bond - until you decide to remove it. Tape can be cut through to separate the mats (without damage to mats), and new tape reapplied when configured.
- Tape is 4" wide by 30 yards. Enough for 3 two-car garages.
- Adhesive is on one side only, allowing the floor to float.
BLT G-Floor Seaming Tape
4" x 30 yards (90 ft.) - $71.00 (Enough for 3, 2-car garages)
12 rolls of 4" x 30 yards - $776.00 (SAVE $76.00!)
|
|
|
G-Floor Clear Vinyl Seaming Strip is used to seam two butted edges together to eliminate having to overlap the material. This will not glue your G-Floor product to the floor. Use with Oatey Bonding Solvent to permanently bond your seams. Each Clear Vinyl Strip is 4" wide.
25 ' length - $18.00
850' length - $203.00
Oatey X-15 Vinyl Bonding Solvent
Use with Seaming Strip to permanently bond your seams.
16 ounce can with applicator- $25.00
Covers approx. 25 to 30 Linear Feet (when applied to both seam strip & mat)
Seaming Strip & Oatey Bonding Solvent - Purchase together for a discount!
25 Ft Clear Vinyl Seaming Strip and one 16 Oz Can with Applicator - $32.00
Ron Hazelton, from "HouseCalls", demonstrates how to apply the seaming strip properly.
|
|
|
|