Flex DuraCote Colors
Flex Duracote Non-slip Coating
Flex DuraCote Colors

Flex DuraCote Non-Slip Coating

From $124.95

Flex DuraCote Non-Slip coating is a colorized, non slip floor coating that protects home and commercial environments from slip and fall accidents. May be used indoors and outdoors. It waterproofs surfaces exposed to rain, liquids, oil, grease and other slippery contaminates. Has built-in UV protection that prevents fading and deteriorating; and thermal insulation to keep surfaces cool enough for bare feet. Available in nine different colors, as well as custom colors for an additional fee.

View Price Chart
View Color Options

Clear
SKU: FDC Categories: ,

Description

Flex DuraCote Non-slip coating is a polymer-based, non slip coating designed to protect home and commercial environments from slip and fall accidents. Available in nine different colors, Flex DuraCote Non-Slip coating can be used on indoor and outdoor surfaces to help create a safe, non skid environment and adds aesthetic value to the property.

Flex DuraCote is a high-solids, water-based, floor coating that is a single component solution which means—no mixing required. It provides high adhesion to all types of surfaces and dries rapidly at ambient temperature of 77 to 80 degrees Fahrenheit.

This all-in-one product waterproofs surfaces exposed to rain, liquids, oil, grease and other slippery contaminates. It ensures safety and helps prevent injurieswhich can result in hospitalization, loss of productivity and legal damages.

Flex DuraCote contains high-end pigments and built-in UV protection that protects against fading and cracking caused by sunlight and other environmental conditions. Its thermal insulation property keeps the surface cool enough to permit exposure to bare feet.

If you’re looking for a non-slip solution for matting or area rugs, please review our Grip Cote Non-Slip Coating products.

Flex DuraCote Non-Slip Coating Product Features:

  • Water-based, single-component coating (no mixing)
  • Available in multiple colors
  • Easy application
  • Environmentally-friendly (no fumes, no odors)
  • Appropriate for areas with heavy pedestrian and light vehicular traffic
  • Adheres to all types of materials and surfaces
  • Waterproof & stain-resistant
  • Can be pressure washed
  • Durable anti-slip surface
  • Rapid dry times with ambient temp. of 77°+F
  • Can be touched up or repaired easily
  • Keeps surfaces cool for bare feet

View MSDS Sheet

Additional information

WeightN/A
Size

1 Gallon, 5 Gallon, 1 Gallon ADA Blue, 5 Gallon ADA Blue

Color

Forest Green, Terracotta, Beige, Black, Battleship Gray, Concrete Gray, OSHA Yellow, OSHA Orange

Pricing

Product (All Formulas)Price
Flex DuraCote 1 gallon bucket (All colors except blue)$124.95
Flex DuraCote 5 gallon bucket (All colors except blue)$549.00
Flex DuraCote 1 gallon bucket (Blue only)$154.95
Flex DuraCote 5 gallon bucket (Blue only)$699.00

 FlexDuraCote is an eco-friendly, biodegradable coating that is easy to apply with a brush or roller. It contains no hazardous ingredients. And the extremely low VOC aspect keeps it free of harmful fumes and odors.

Colors

Available colors are: forest green, terracotta, beige, black, battleship gray, concrete gray and safety colors ADA blue, OSHA yellow and OSHA orange.Custom colors are available for an additional fee. Please contact us directly.

Flex DuraCote Colors

 

Where to Use

  • Driveways
  • Patios
  • Pool Decks
  • Marine Docks
  • Parking lots/garages
  • Ramps
  • Handicap accessible areas
  • Loading docks
  • Athletic Courts
  • Factory/Warehouse flooring
  • Basement floors
  • Entrances and lobbies

Application

Flex DuraCote is best applied with a foam roller, thin stiff bristle broom or a squeegee. Pour the material at a strategic point on the surface, and spread it evenly across the surface treating no more than 25 square feet per person at a time. Make sure the surface temperature is cool enough to permit easy spreading due to the fast drying nature of the coating.

Flex DuraCote is designed to provide adequate coverage with a single coat. If more than one coat is desired, make sure that the first coat is sufficiently dry before applying the second coat. After overnight drying, the coated surface will be ready to accept foot traffic. A minimum of 24-hour cure time is necessary prior to subjecting Flex DuraCote to vehicular traffic. The curing process will continue over a 48 to 72 hour period, at which time it will achieve its optimal properties. Do not apply at temperatures below 50°F or above 90°F. Postpone the application if rain or heavy dew is imminent.  Avoid heavy buildup, puddling, and overlapping.

Flex DuraCote is designed to be used as supplied and should not be thinned or mixed with other materials. Coverage per gallon will be dependent on the porosity of the target surface and the ultimate dry lm thickness desired. In general,Flex DuraCote should yield on average about 100 square feet per gallon. Flex DuraCote will easily fill small cracks and deformations to provide a smooth contiguous surface. For wide cracks, deep holes, etc., it is best to repair with a patching compound suitable for the intended surface prior to the application of Flex DuraCote.

Reviews

There are no reviews yet.

Be the first to review “Flex DuraCote Non-Slip Coating”

Your email address will not be published. Required fields are marked *