GripCote Non Slip Coating

From $16.95

GripCote Non slip coating protective coating solutions from LiquiGuard Technologies represents the next generation in GREEN, water-based technologies to prevent movement or slipping in a wide range of surfaces including area rugs, floor mats, and carpet tiles. GripCote can provide safety to your family, employees and customers by eliminating mat movement for indoor and outdoor applications and prevent slip and fall accidents.

View Price Chart

Description

GripCote non slip coating family of products are designed to keep rugs, floor mats and tiles from moving regardless of the surface on which they sit or wet conditions. These products are composed of tough and durable polymers that create a strong bond with most materials. They are unique in that they provide non-slip properties without the use of any adhesives or plasticizers that can be transferred to other surfaces. The cured film is extremely flexible and when applied to the underside of a mat or rug and will not change the feel of the surface.

GripCote non slip coating products are easy to apply to the bottom surface of any mat by simply rolling or brushing it on and then wait for it to dry. Instantly, your mats or rugs will become completely slip-proof! The GripCote products are Green solutions with no fumes, minimal odors and extremely low VOC’s which contribute to LEED rating credits.

GripCote provides 3 distinct formulas depending on the type of material it will be bonding to and the floor surface. Please review each product description to discern which formula is best suited for your application.

Additional information

Weight N/A
Select

GripCote X 8 oz, GripCote X 16 oz, GripCote X 32 oz, GripCote X 1 gallon, GripCote X 5 gallons, GripCote Ultra 8 oz, GripCote Ultra 16 oz, GripCote Ultra 32 oz, GripCote Ultra 1 gallon, GripCote Ultra 5 gallons, GripCote Hi-Tac 8 oz, GripCote Hi-Tac 16 oz, GripCote Hi-Tac 32 oz, GripCote Hi-Tac 1 gallon, GripCote Hi-Tac 5 gallons

Pricing

Product (All Formulas) Price
Grip Cote 8 oz. $16.95
Grip Cote 16 oz. $24.95
Grip Cote 32 oz. (Quart) $39.95
Grip Cote 1 gallon $124.95
Grip Cote 5 gallons $599.75

Application

Grip Cote Application and Cleaning
Prep and Clean up: Appropriately mask off areas that need to be kept free of GripCote. The target surface should be free of dirt, debris and oil or grease, prior to application. Wipe off overruns, spills and splatters immediately with water. Thoroughly clean hands and tools after use with soap and warm water. Observe all personal precautions as you would with any other paint or coating product. Do not apply at temperatures below 50°F. Avoid heavy buildup, puddling and repeated overlapping of GripCote.
 

GripCote-X is easy to apply using a soft bristle or foam brush. Stir or shake the GripCote-X container well prior to use. The coating when wet has a brownish-blue appearance, applies easily and will dry to an almost black finish. For best results apply two coats; allow the first coat to dry partially before applying the second coat. Available for use in 4-6 hours. Allow 24 hours or more for full cure before subjecting the article to heavy use.

When applied to washable mats, GripCoteX can withstand up to 20 wash cycles in industrial washing machines when low alkaline detergents are used.

Coverage: Approximately 400 square feet per gallon.

 

GripCote-Ultra is easy to apply using a soft bristle, foam brush or low nap roller. Stir or shake the GripCote container well prior to use. The coating has a milky appearance, applies easily and will dry to a clear finish. For best results apply two coats; allow the first coat to dry partially before applying the second coat. Additional coats maybe applied for a longer lasting, more ‘rubbery’ feel. The GripCote Ultra coated object will be ready for use once the coating becomes totally clear. Allow 24 hours or more for full cure before subjecting the article to heavy use.

One or more coats of GripCote-Ultra may be applied depending on the level of slip resistance desired. Depending on the type of fiber and the tightness of the weave, a gallon of GripCote-Ultra will cover approximately 350 to 400 square feet.

 

GripCote Hi-Tac is easy to apply using a soft bristle or foam brush or via hot rolling process. Stir or shake the GripCote Hi-Tac container well prior to use. The coating has a milky appearance, applies easily and will dry to a clear finish GripCote Hi-Tac coated object will be ready for use once the coating becomes totally clear. Allow 24 hours or more for full cure before subjecting the article to heavy use.

GripCote Hi-Tac provides approximately 450 to 500 square feet of coverage per gallon at approximately 2 mil DFT (dry film thickness) on smooth, hard surfaces. Coated object will be ready for use 4-8 hours after application depending on ambient temperature and humidity. Forced drying can be accomplished via the use of coil heaters, infra red lamps or warm air blowers.

 

The following images represent an example of Grip Cote X being applied to the backing of a vinyl mat. In the first image Grip Cote X is being applied generously with a foam brush. Application should not cause excessive build-up on the mat. The coating should be even. The second and third image represent the coating beginning to dry and cure. Drying time is dependent on humidity and temperature. Typically, the product can be recoated within an hour. Complete drying is typically 4-6 hours. Please allow a full 24 hours for complete curing time before the mat is subjected to heavy foot traffic.

Review the instructions on the container for complete directions.

GripCoteX Application Step 1
GripCoteX Application Step 2 GripCote X Application Step 3

 

Details

GripCote-X provides both non-slip and waterproofing properties to prevent movement and hydroplaning effects on commercial rubber or PVC backed entry mats, doormats or other industrial type matting. It can also be used with natural woven mats or area rugs such as broadloom, coir, hemp or sisal. GripCote-X replaces double-sided, foam tapes and the like.

GripCote Ultra has been formulated for application on tightly woven and artistic floor coverings. This includes Persian or Indian area rugs, hallway runners, wool and cotton throw rugs used indoors, on patios or other covered areas. GripCote-Ultra replaces carpet pads, PVC underlayment, foam tapes and the like.

GripCote Hi-Tac is a releasable adhesive formula designed with intensive tackiness to be used as a bonding agent for carpet tiles, luxury vinyl tiling, various wallcovering tiles and panels and many other surfaces. For smooth surfaces, including treated concrete, wood floors and particle board. It is an effective alternative to pressure-sensitive adhesives, tapes and similar products.

Product Usage

GripCote-X has been specifically formulated to provide an effective and lasting non-slip surface for use in high traffic indoor or outdoor commercial environments. Its key applications are geared towards commercial rubber or PVC backed entry mats, doormats or other industrial type matting including Nitricell sponge backed anti-fatigue mats. It can also be used effectively with natural woven mats or area rugs such as broadloom, coir, hemp or sisal. Its water and oil resistant structure will protect the coated surface from slipping or being damaged by spills and its non-tacky composition will resist the attraction of dust, sand, food or other contaminants. GripCote-X replaces double-sided, foam tapes and the like with a more effective and lasting non-slip coating that can be easily brushed on, rolled or sprayed when applied to larger surfaces. GripCote-X is a dark material with medium viscosity that will dry to a brown-black smooth finish.

GripCote Ultra has been formulated for application on tightly woven and artistic floor coverings. This includes Persian or Indian area rugs, hallway runners, wool and cotton throw rugs used indoors, on patios or other covered areas. GripCote Ultra will bond effectively with all substrates including carpet and will not transfer or leave residue on the contacting surface. In addition to firmly anchoring the floor coverings, GripCote Ultra’s water and oil resistant structure will protect the coated surface from being damaged by liquid spills. GripCote-Ultra replaces carpet pads, PVC underlayment, foam tapes and the like with a more effective and lasting non-slip coating. It is easy to apply using a soft bristle or foam brush or a tight nap roller and can also be sprayed when applied to large surface areas. GripCote Ultra is a white viscous material that will dry to a transparent and somewhat tacky finish once applied.

GripCote Hi-Tac has been formulated specifically for pre-sized, ready-to-assemble flooring and wallcoverings. It can be used on a wide variety of materials including carpet tiles, PVC and simulated wood flooring planks, firmly anchoring those surfaces to the substrate and effectively resolving the problem of dynamic load movement. GripCote Hi-Tac is a “releasable adhesive”which imparts a very tacky feel to the coated object and helps to hold it in place even on very smooth surfaces, including treated concrete, wood floors and particle board. It is an effective alternative to pressure-sensitive adhesives, tapes and similar products. GripCote Hi-Tac can be easily applied with a soft-bristled brush, by spray or high-speed rollers in the manufacturing process as a final treatment. This benefit allows manufacturers the luxury of treating their product prior to shipping, offering end users quick, easy and effective installation on the job site. GripCote Hi-Tac is a white, viscous material that dries to a clear film which acts as a protective moisture and vapor barrier against dampness and fumes that may be released from an unsealed floor.

MSDS

Reviews

There are no reviews yet.

Be the first to review “GripCote Non Slip Coating”

Your email address will not be published. Required fields are marked *