WaterHog Eco Elite mat’s construction and performance is combined with a 100% post consumer recycled P.E.T. polyester fiber system that is reclaimed from plastic bottles and a 100% rubber backing that contains 15% to 20% post consumer car tire rubber. This is most environmentally friendly WaterHog mat ever made. The new herringbone pattern complements WaterHog Eco Elite Roll Goods and delivers an upscale appearance with high performance dirt and moisture stopping properties.
Exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
Holds up to 1.5 gallons of water/sq. yd.
WaterHog ECO Elite Mat offers custom sizes in 3′, 4′ and 6′ widths to 60′ long.
Certified slip-resistant by the NFSI.
Order with rubber border or matching fabric border.
Each WaterHog Eco Elite mat has the universal recycle system molded to the face to promote recycling and has a recycle content label on back.
Additional information
Weight
N/A
Size
2' x 3', 3' x 4', 3' x 5', 3' x 8.4', 3' x 10', 3' x 12.2', 3' x 16', 3' x 20', 4' x 6', 4' x 8.4', 4' x 10', 4' x 12.2', 4' x 16', 4' x 20', 6' x 6', 6' x 8.4', 6' x 12.2', 6' x 16', 6' x 20'
Select Border
Rubber Borders, Matching Fabric Borders
Backing
Gripper for Carpeted Surfaces, Smooth for Smooth Surfaces
Custom sizes are available in 3′, 4′ and 6′ widths up to 60′ in length. For large orders over 50 mats please call 1-866-411-6287
4′ Widths
$7.67
6′ Widths
$7.67
Colors
Black Smoke
Black Smoke
Chestnut Brown
Chestnut Brown
Gray Ash
Gray Ash
Indigo
Indigo
Khaki
Khaki
Maroon
Maroon
Regal Red
Regal Red
Southern Pine
Southern Pine
Details
Additional WaterHog Mat Benefits
1. Indoor/Outdoor: Durable PET polyester face suitable for indoor or outdoor use. 100% recycled PET polyester fiber system dries quickly preventing fading and rotting.
2. Raised NUB surface: Removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in.
3. Colorfast: Solution dyed for excellent light and wet fastness.
4. Rubber backing: Lays flat, won’t crack or curl like vinyl mats.
5. Exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
6. Green friendly rubber backing has 15% recycled rubber content and is available in smooth or cleated types.
7. Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
8. Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
9. Not adversely effected by salt or ice melt.
10. Certified slip-resistant by the National Floor Safety Institute.
11. Recommended uses for computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
12. Easy to clean: Just vacuum or hose off and hang to dry.
13. Special TriGrip cleated 100% rubber backing to minimize mat movement. Also available with smooth back for hard surfaces.
14. Passes Flammability Standard DOC-FF-1-70
Specs
GENERAL SPECIFICATIONS:
SURFACE
FIBER TYPE:
Solution-dyed polypropylene, recycled PET polyester, recycled from soda bottles
NUB HEIGHT:
1/4″ and 7/17″
WEIGHT:
30 ozs. per square yard
DESIGN:
Herringbone
BACKING
TYPE:
100% SBR Rubber (15% Recycled Content)
THICKNESS:
.190″ – Nubs
.050″ – Between Nubs
.160″ – Border
DUROMETER:
60
TENSIL:
600 PSI
TESTING
Passes Flammability Standard DOC-FF-1-70
Anti-Static rating averaging 1.2 KV with a maximum average voltage of 1.63 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99).
Backings
Cleaning
CLEANING INSTRUCTIONS
1. Vacuum Daily When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Reviews
There are no reviews yet.
Be the first to review “WaterHog ECO Elite Mat” Cancel reply
WaterHog Classic Diamond mat features all the same great benefits as the flagship, WaterHog Classic entrance mat, but with a raised “diamond” design pattern. The mat is designed for high traffic, indoor and outdoor use. The exclusive “Water Dam”border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage. 100% UV polypropylene fabric will not fade in sunlight and holds up to 1.5 gallons of water per sq. yd. The raised “diamond” surface removes and traps dirt and moisture and holds it below shoe level on the mat.
The WaterHog Classic Entrance mat features a non-skid heavy-duty rubber backing which is designed for high traffic, indoor and outdoor entrances. The exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage. The 100% UV polypropylene fabric will not fade in sunlight and holds up to 1.5 gallons of water/sq. yd. WaterHog Entrance mat has a raised NUB surface that removes and traps dirt and moisture and holds it on the mat below shoe level so it is not tracked in. The Waterhog Classic mat can be ordered with a rubber border edge or a matching fabric edge.
WaterHog Custom Masterpiece Select entrance mats combine beauty, durability and functionality. Their innovative woven “basketweave” design is engineered so it scrapes dirt and water off feet from all traffic angles and looks great as well. Our original design holds dirt and water beneath shoe level, preventing dirt and moisture from tracking onto floors. Like all other WaterHog entrance mat products, Masterpiece Select is easy to maintain and clean.
WaterHog Grand Classic One End offers exceptional performance and exceptional beauty. An amazing mat series combining all of the performance of our Waterhog Premier mat with two additional features: an innovative rubber-reinforced face design for added beauty, and a green friendly face constructed of 100% post consumer recycled P.E.T. polyester fiber system that is reclaimed from plastic bottles providing a mat surface with an attractive look that’s easy to maintain.
WaterHog Grand Classic One End is configured as rectangle with a half oval on one end.
WaterHog Masterpiece Select entrance mats combine beauty, durability and functionality. Their innovative woven “basketweave” design is engineered so it scrapes dirt and water off feet from all traffic angles and looks great as well. Our original design holds dirt and water beneath shoe level, preventing dirt and moisture from tracking onto floors. Like all other WaterHog entrance mat products, Masterpiece Select is easy to maintain and clean.
Reviews
There are no reviews yet.