Description
WaterHog Max Grand Half Oval product features:
- For high traffic, indoor and outdoor use.
- Fashion border constructed of the same fiber system as the mat surface for an attractive look.
- Easy to clean! Simply vacuum or steam clean
- Certified slip-resistant by the NFSI.
Details
Additional WaterHog Mat Benefits
1. Indoor/Outdoor: Durable PET polyester face suitable for indoor or outdoor use. 100% recycled PET polyester fiber system dries quickly preventing fading and rotting.
2. Raised NUB surface: Removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in.
3. Colorfast: Solution dyed for excellent light and wet fastness.
4. Rubber backing: Lays flat, won’t crack or curl like vinyl mats.
5. Exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
6. Green friendly rubber backing has 15% recycled rubber content and is available in smooth or cleated types.
7. Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
8. Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
9. Not adversely effected by salt or ice melt.
10. Certified slip-resistant by the National Floor Safety Institute.
11. Recommended uses for computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
12. Easy to clean: Just vacuum or hose off and hang to dry.
13. Special TriGrip cleated 100% rubber backing to minimize mat movement. Also available with smooth back for hard surfaces.
14. Passes Flammability Standard DOC-FF-1-70
Cleaning
CLEANING INSTRUCTIONS
1. Vacuum Daily
When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Reviews
There are no reviews yet.