ESD Ground CordESD Heel GrounderESD Wrist StrapESD Common Cord
ESD Heel Grounder
ESD Ground Cord
ESD Heel Grounder
ESD Wrist Strap
ESD Common Cord

ESD Accessories

From $10.50

ESD Accessories work with all electro-static dissipative mats, commonly referred to as anti-static mats or conductive mats. The ESD Ground cord is essential to connect all ESD mats to a building ground. The ESD Heel Grounder allows static electricity to pass from the worker to the ESD matting or flooring. For optimum effectiveness, use our 6’ Coil Cord and ESD Wrist Strap to ground workers to their ESD Workstation Mat tabletop mats.

View Product List

Clear

Description

ESD Accessories

15′ Ground Cord
Use the ESD accessories ground cord to connect all ESD tabletop and floor mats to a building ground. The solderless terminal can be connected to an electrical outlet using the screw in the outlet cover.

Heel Grounder
Made for workers wearing insulative shoes, the Heel Grounder allows static electricity to pass from the worker to the ESD matting or flooring. One size “fits all” and the Velcro® loop allows for easy attachment. Allow the fabric strip to touch the workers skin for best performance.

Wrist Strap
For optimum effectiveness, use our 6’ Coil Cord and Wrist Strap to ground workers to their ESD tabletop mats. To complete the connection to a building ground, connect the coil cord to our 797.CPCord or simply clip to the grounding snap.

Common Point Ground Cord
Equipped with dual jacks, our common point ground cord allows two wrist straps to be grounded at the same point to our ESD Workstation Mat tabletop mats. The molded-in male fastener snaps to table-top mats while the solderless terminal at the end of the 15’ cord connects to a building ground.

Additional information

WeightN/A
Select

ESD 15' Ground Cord, ESD Heel Grounder, ESD Wrist Strap, ESD Common Ground Cord

ESD Accessories Product List
793-ESD Ground CordESD AccessoriesESD Ground Cord – No. 793.15cord

Use the ESD Acessories ground cord to connect all ESD tabletop and floor mats to a building ground. The solderless terminal can be connected to an electrical outlet using the screw in the outlet cover.

Product Specs
Uses: To connect all ESD mats to a building ground.
Construction: Molded-in male snap fastener on one end and solderless terminal on the other.
Resistivity: Integral one megaohm resistor
Snap: Conforms to 10mm snaps
Length: 15′
Price: $10.50


ESD Heel Grounder – No. 793.HG

Made for workers wearing insulative shoes, the Heel Grounder allows static electricity to pass from the worker to the ESD matting or flooring. One size “fits all” and the Velcro® loop allows for easy attachment. Allow the fabric strip to touch the workers skin for best performance.

Product Specs
Uses: To allow shoes to conduct static discharge
Construction: Two-layer laminated rubber sole with Velcro® loop attachment
Resistivity: One-megaohm resistor
Width: 1.5″
Thickness: 0.060″

Price: $10.50


793Wrist-cordWrist Strap – No. 793.6WStrap

For optimum effectiveness, use our 6’ Coil Cord and Wrist Strap to ground workers to their ESD Workstation Mat tabletop mats. To complete the connection to a building ground, connect the coil cord to our 797.CPCord or simply clip to the grounding snap.

Product Specs
Uses: To ground the worker to the mat
Construction: One inch wide comfort strap with copper sulfide fibers, 6’ Coil Cord with snap on one end and a banana jack on the other. Separate alligator clip.
Resistivity: One megaohm resistor
Price: $10.50


793Coil-CordCommon Point Ground Cord – No. 797.CPCord

Equipped with dual jacks, our common point ground cord allows two wrist straps to be grounded at the same point to our ESD Workstation Mat tabletop mats. The molded-in male fastener snaps to table-top mats while the solderless terminal at the end of the 15’ cord connects to a building ground.

Product Specs
Uses: To achieve a common ground with the building, table-top mat and wrist strap
Construction: Molded-in male snap fastener (with two sockets to accommodate banana jacks)
Resistivity: No resistor necessary
Snaps: Conforms to 10mm snaps
Length: 15’
Price:
$12.50

 

Reviews

There are no reviews yet.

Be the first to review “ESD Accessories”

Your email address will not be published. Required fields are marked *