Showing 1–12 of 19 results
Disinfectant Pumps & Sprayers are designed to be used with the many disinfectant solutions that we offer for eliminating the spread of germs and viruses. We offer sprayers for our quart size bottles and pumps for our gallon size containers.
To disinfect and sanitize larger areas, we recommend our E-Spray Electrostatic Sprayer. The E-Spray sprayer is a light weight ergonomically designed electrostatic sprayer used to disinfect any large surface not harmed by water. The E-Spray saves time and energy versus traditional plastic spray or pump type heads by dispensing up to a half gallon of solution in less than 15 minutes.
ESD Accessories work with all electro-static dissipative mats, commonly referred to as anti-static mats or conductive mats. The ESD Ground cord is essential to connect all ESD mats to a building ground. The ESD Heel Grounder allows static electricity to pass from the worker to the ESD matting or flooring. For optimum effectiveness, use our 6’ Coil Cord and ESD Wrist Strap to ground workers to their ESD Workstation Mat tabletop mats.
Flex DuraCote Non-Slip coating is a colorized, non slip floor coating that protects home and commercial environments from slip and fall accidents. May be used indoors and outdoors. It waterproofs surfaces exposed to rain, liquids, oil, grease and other slippery contaminates. Has built-in UV protection that prevents fading and deteriorating; and thermal insulation to keep surfaces cool enough for bare feet. Available in nine different colors, as well as custom colors for an additional fee.
We carry two G-Floor 3M adhesive products from 3M Manufacturer specifically recommended by Better Life Technology to work with seaming or bonding vinyl G-Floor matting together. 3M Formula 80 brand Rubber & Vinyl Spray Adhesive is a contact-based spray adhesive for adhering rubber & vinyl to the floor. 3M Scotch-Weld 4475 Industrial-grade Plastic Adhesive is a industrial-grade plastic adhesive for permanently bonding vinyl seams.
Basic installation of G-Floor© Roll-Out Flooring does not require adhesives of any kind. However, for special applications and professional installation, many of our customers and vendors have used various types of adhesives. The manufacturer, Better Life Technology, has tested and recommends the following G-Floor Adhesive products for marine or outdoor substrates. Always read and follow label directions for best results.
G-Floor Edge & Center Trim can be used with all G-Floor Roll Out Flooring products. Transition from mat to floor with the G-Floor Edge Trim. Use the G-Floor Center Trim to join two mats together at the seam. Both products are made of 100% nylon material. Available in black or grey.
Basic installation of G-Floor© Roll-Out Flooring does not require adhesives or seaming of any kind. However, for special applications and professional installation, many of our customers prefer seaming two rolls together, for example in a double car wide garage. The manufacturer has tested and recommends the following seaming tapes to be effective solutions. Always read and follow label directions for best results.
GelPro Gelly Grippers™ are double-sided adhesive pads designed to keep GelPro comfort floor mats and other matting and rugs from moving or sliding on flooring with slick surfaces. These flexible 3″ diameter gel pads easily attach to the bottom surface of all GelPro comfort mats, most accent or area rugs or anything else you need to secure in place! Featuring a reusable, washable design, Gelly Grippers are easily cleaned and the adhesive is renewed by simply washing with water. Four adhesive pads come in a pack of Gelly Grippers. Also, works great in your car to secure cell phones to the dash!
Size: 3″ diameter
Price: $11.95 (pack of 4)
Grip Strips tape is designed specifically for use on highly polished or shiny floors, it will prevent sponge-backed mats from moving out of place. They’re so effective that only a few are needed even in high traffic areas. This unique polymer tape is permanently tacky and does not promote bacterial growth or leave a residue when removed. If it ever gets dusty or dirty, simply wipe it off with Simple Green or a similar cleanser. The strip will quickly dry and regain its tack.
PKG of (4) 6” x 6” strips
Price: Please call for pricing and availability.
GripCote Non slip coating protective coating solutions from LiquiGuard Technologies represents the next generation in GREEN, water-based technologies to prevent movement or slipping in a wide range of surfaces including area rugs, floor mats, and carpet tiles. GripCote can provide safety to your family, employees and customers by eliminating mat movement for indoor and outdoor applications and prevent slip and fall accidents.
GripSafe Reflective Tape prevents mat movement even in the most heavily trafficked work areas. Designed for use on concrete (sealed or unsealed), terrazzo, tile or even vinyl, this sturdy tape will hold rubber and vinyl anti-fatigue mats in place. GripSafe can also be used to designate specific areas or pathways both inside and out.
Sold in full rolls only. 4″ wide x 45′
Price: $199.95
Showing 1–12 of 19 results